PI Metering Unit service in Oz - or ship to UK?

[stallie]

Just before I pulled the dash etc out to get to the heater (some months ago now ) I noticed a slight fuel weep from the PI which has not been off the car for years - well before the advent of unleaded. I'd like to get the seals replaced, and all recommendations suggest not to do it ones self.

 

So, any can any Aussies here suggest anywhere to get it done locally that they would recommend? Otherwise I will look into shipping to UK for refurb/exchange.

 

Cheers

[Colin White]

Try Greg Tunstill in Brisbane - he can do all metering unit repairs, calibrations etc.

Tel (07) 3821 0622

 

Website: www.gregtunstallmechanical.com.au

[stallie]

Much obliged. Will call Mundy.

[AndrewP]

Stallie,

 

Gregs name came up when I looked but the price was..well...see what you can get and compare with shipping and refurb to the UK. In my experience it was cheaper doing the latter option (QLD may as well be in the UK as its still postage and not a local person as such).

In the end, I was lucky enough for Alec P to offer assistance with a 2nd hand unit he had, so it worked out MUCH cheaper.

Perhaps see if you can get a reasonable MU from someone in the UK (either on here or Ebay) and post it to your preferred refurb person. That way you can avoid some of the postage costs of sending yours back.

Can personally recommend Neil Ferguson (K Raven Smith) who did a good job on the one from Alec..probably a good time to look at refurb injectors too.

 

Cheers

Edited January 29, 2012 by AndrewP

[Rorr1971]

Hi Stallie

 

There is a guy in North Melbounre I have used, really good. He is has all the old equipment for setting MU and injectors up.

 

Ken Airs Petrol Injection Services

 

 

Address: 5 Baillie St, North Melbourne, VIC, 3051

Phone number: (03) 93297559

 

 

 

Thanks Rob

[k_raven_smith]

_{hi stallie pm sent. neil}