Jump to content
Sign in to follow this  
mjc

Inlet manifold throttle spindes

Recommended Posts

Been trying to remove the throttle spindles today, but can't remove them.

 

Removed the disc screws but can't remove the shafts.

 

Is there something else I should be doing?

 

Many thanks

 

Mike

Share this post


Link to post
Share on other sites

Hi Mike

 

I assume you have removed the butterflies and un hooked the return spring.

 

DONT DO WHAT I DID AND FORGET TO MARK WHERE EACH BUTTERFLY CAME FROM. THE RESULT IS DISASTEROUS!!!!!!!!

 

The only other thing I can suggest is to soak in Plusgas or similar and then some light taps with a brass drift.

 

The problem is the Ally body wears a groove in the brass spindle---- hence why you get air leaks here.

 

John

Share this post


Link to post
Share on other sites

Finally got the spindles out but very tight.

 

Where's the best place to send the manifolds to be refurbed and have improved spindles fitted?

 

Mike

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.