JJC Posted November 11, 2011 Report Share Posted November 11, 2011 Would be grateful if someone could remind who was making the bonnet release mechanisms. It was in TRAction some time ago. JJC Quote Link to post Share on other sites
RogerH Posted November 11, 2011 Report Share Posted November 11, 2011 Have a look on e-bay, they sell them there. Roger Quote Link to post Share on other sites
JJC Posted November 11, 2011 Author Report Share Posted November 11, 2011 Thanks, will try with my limited Internet skills Quote Link to post Share on other sites
TR4Geoff Posted November 11, 2011 Report Share Posted November 11, 2011 The company you want are C. P. Fasteners. Geoff Quote Link to post Share on other sites
DIYBOSSCAT Posted November 11, 2011 Report Share Posted November 11, 2011 http://www.ebay.co.uk/itm/Triumph-TR4-a-TR5-TR6-TR250-Bonnet-Release-Kit-/180743581786?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1528305a#ht_1143wt_1187 Quote Link to post Share on other sites
Mark1965TR4aBRG Posted November 12, 2011 Report Share Posted November 12, 2011 I've fitted one of these - works a treat. I keep meaning to put a stop in the form of a small dia nut/bolt to prevent the arm going over TDC as it were and passing the point of no return!! Have also seen a piece of string as a secondary release systeme too.. Quote Link to post Share on other sites
jamie hart Posted November 12, 2011 Report Share Posted November 12, 2011 Thanks guys, have just bought one for my 4 rebuild! Quote Link to post Share on other sites
Mark1965TR4aBRG Posted November 12, 2011 Report Share Posted November 12, 2011 Jamie - I will be in Cape Town at approximately 10:25 tomorrow morning - what's the weather doing? I've 2 1/2 days there and then off to Durban & J.burg.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.