RobinTR6 Posted November 7, 2011 Report Share Posted November 7, 2011 I am off to the NEC this week so hope to pick up some bits. One of the studs on my exhaust manifold to downpipe has sheared off whilst fitting a stainless replacement exhaust. Cant tell from the bits what size it is, can someone put me right on this please (thanks) ? Just to confirm its a 69 CP TR6 Regards Robin Quote Link to post Share on other sites
mjc Posted November 7, 2011 Report Share Posted November 7, 2011 Robin 3/8" UNC both ends 1&13/16" long as per Rimmers cat no 115696 Mike Quote Link to post Share on other sites
RobinTR6 Posted November 7, 2011 Author Report Share Posted November 7, 2011 Mike thanks, and very prompt too. Regards Robin Quote Link to post Share on other sites
BlueTR3A-5EKT Posted November 9, 2011 Report Share Posted November 9, 2011 (edited) Robin Give me a call if you do not get the stud, nut & gasket at the weekend. I have NOS items here in my garage at Pinner. Cheers Peter W Edited November 9, 2011 by BlueTR3A-5EKT Quote Link to post Share on other sites
RobinTR6 Posted November 9, 2011 Author Report Share Posted November 9, 2011 Peter, just ordered them from TRGB to collect at NEC. I need the manifold to downpipe gasket , studs and nuts and the manifold to head gasket studs and nuts. Do you have all that lot Robin Quote Link to post Share on other sites
BlueTR3A-5EKT Posted November 10, 2011 Report Share Posted November 10, 2011 Robin I have only the down pipe items - The GEG724 gasket and 115696 stud and 108951 brass nut. I do have a spare early CP cylinder head assy with manifold studs and a few nuts, if you get into the effluent. No inlet/exhaust manifold gaskets though. Cheers Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.