peejay4A Posted October 25, 2011 Report Share Posted October 25, 2011 Make sure they are fitted the right way the bolts are offset They weren't on mine. Quote Link to post Share on other sites
Brian-Northampton Posted October 26, 2011 Author Report Share Posted October 26, 2011 (edited) OK - shims fitted. Only needed 2mm shims, not 3mm. Here are the shims that I made up 2" x 2" worked a treat, but because they're square, when fitted, the offside one is a gnat's whisker away from the lower steering column rubber coupling. So best to file off the corner as shown here. Thought I'd best point it out for the benefit of others. Cheers, Bri. Edited October 26, 2011 by Brian-Northampton Quote Link to post Share on other sites
ianc Posted October 27, 2011 Report Share Posted October 27, 2011 Brian, That's one of the very many great things about this Forum, the practical advice and the little tips (like taking off the corner of the shim) which stop others making mistakes. Glad you have success. Ian Cornish Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.