jbenajes Posted July 13, 2010 Report Share Posted July 13, 2010 Hello. After many months of intermittently reconditioning the gearbox and the engine, it is finally time for planning the installation of the ensemble to the chassis. What ancillaries would you recommend to leave out in order to ease the engine installation or to reduce weight? - starter motor? - generator? - cylinder head? - gearbox lid with lever? -petrol pump? - radiator fan? - water pump? - intake and exhaust manifolds? - carburettors? - crankcase venting pipe? I plan to use a strong crane, so the total weight should not be a problem except for manoeuvring around the garage. Thanks. Jesus Quote Link to post Share on other sites
stuart Posted July 13, 2010 Report Share Posted July 13, 2010 Easy enough to install with all of the above fitted with the exception of the carbs, radiator fan, petrol pump and the gear lever. If you have access to a load leveller like this. Load leveller Will make life a lot easier. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.