Geoff359 Posted August 31, 2009 Report Share Posted August 31, 2009 Anyone any suggestions on the type of paint to use for things such as Heater, Steering column etc.? Geoff M Quote Link to post Share on other sites
Alec Pringle Posted August 31, 2009 Report Share Posted August 31, 2009 Hi Geoff, synthetic enamel if you're brush painting, hard wearing and economical from any car paint factor - that's my preference, even if it is slow drying. And use a decent metal primer, from the same source . . . . The diy store variety I avoid like the plague, invariably expensive and rarely good quality. Cheers, Alec Quote Link to post Share on other sites
Geoff359 Posted September 1, 2009 Author Report Share Posted September 1, 2009 Hi Geoff, synthetic enamel if you're brush painting, hard wearing and economical from any car paint factor - that's my preference, even if it is slow drying. And use a decent metal primer, from the same source . . . . The diy store variety I avoid like the plague, invariably expensive and rarely good quality. Cheers, Alec Hi Alec, Thanks for the tip. There are so many paints out there so it's better to ask other people for their experiences rather than go by trial and error! I'll give it a try. Geoff M Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.