Richardtr3a Posted June 30, 2009 Report Share Posted June 30, 2009 What is the preferred method of removal for the pinion oil seal on my Girling back axle? Thank you for any advice. Quote Link to post Share on other sites
pfenlon Posted June 30, 2009 Report Share Posted June 30, 2009 input shaft seal comes adrift easily normally Prop off nut off flange out 2 X small levers and prise it out or knock a driver in destroying the old seal and it will flick out no trouble. Hub seals easy job take out the shafts, same process. Use a large socket to tap in the new seal after coating the outside sparingly with wellseal Hope this helps Quote Link to post Share on other sites
Don Elliott Posted June 30, 2009 Report Share Posted June 30, 2009 Excellent detailed steps, Peter Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.