jstone Posted June 13, 2007 Report Share Posted June 13, 2007 Hi All, Looking for a bit of advice from all that wealth of knowledge out there ! How have you fixed Kick Plates to your TR6 ? Is it best to use the screws or to bond it with an adhesive or use both ? many Thanks Jeremy Quote Link to post Share on other sites
Guest ron Posted June 13, 2007 Report Share Posted June 13, 2007 Hi Jeremy I stuck mine on with 'No More Nails' about 5 or 6 years ago, they have stayed put. Ron Quote Link to post Share on other sites
pinky Posted June 13, 2007 Report Share Posted June 13, 2007 Hi All, Looking for a bit of advice from all that wealth of knowledge out there ! How have you fixed Kick Plates to your TR6 ? Is it best to use the screws or to bond it with an adhesive or use both ? many Thanks Jeremy I use 3/32 pop rivets and a ante corrosive paste under the kick plate to prevent corrosion as the kick plate is stainless steel and to dissimilar metals in direct contact causes extreme corrosion pinky Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.