trerynn Posted November 18, 2016 Report Share Posted November 18, 2016 Looking for information to enable conversion to EFI. Not a ready produced kit but genuine diy job, parts from brakers ,off eBay gumtree etc. If anyone has done this could we please have apart specific list of what was obtained and used. ? Quote Link to post Share on other sites
TriumphV8 Posted November 18, 2016 Report Share Posted November 18, 2016 Take manifold for WEBER DCOE, throttle bodies 45mm from BILAS and maybe all the rest from Bilas, too or from a breaker for more DIY. Other than TR6 there are no parts that can be made to fit or make sense to modify something availiable. Quote Link to post Share on other sites
mike3md Posted November 18, 2016 Report Share Posted November 18, 2016 Here's a different take on EFI: http://www.classicfuelinjection.co.uk/triumphfuelinjectionconversion.htm Quote Link to post Share on other sites
BlueTR3A-5EKT Posted November 19, 2016 Report Share Posted November 19, 2016 (edited) Did you research the type of Motorcycle throttle bodies that are suitable? http://altiss.com/ThrottleBodies.html Ebay offers throttle bodies from the Suzuki GSXR at 150 ish set of 4 from a breaker. http://www.ebay.co.uk/bhp/gsxr-throttle-bodies Did you research locostbuilders? http://www.locostbuilders.co.uk/viewthread.php?tid=162955 Peter W PS throttle body specs http://www.neileverett.madasafish.com/mods/mods_throttle_bodies.htm Edited November 19, 2016 by BlueTR3A-5EKT Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.