Bob Brennan Posted March 28, 2007 Report Share Posted March 28, 2007 How do I remove the old bolts? These are parts #9 in Moss p. 16. Thanks for your suggestions. Quote Link to post Share on other sites
stuart Posted March 29, 2007 Report Share Posted March 29, 2007 How do I remove the old bolts? These are parts #9 in Moss p. 16. Thanks for your suggestions. Bob I assume you mean the studs in the outlet of the manifold where the down pipe bolts on. Im afraid they can be a bit of a pain to remove. The usual method is to soak them in Plusgas or Castrol Flick releasing agent for a few hours and then lock a pair of steel nuts with the flats parallel on to the protruding section and then apply a good amount of heat to the Manifold where the studs go in. By using a good length socket down over both nuts and alternately undoing then tightening they should come out. Be careful to keep the socket in line otherwise it is possible to break a corner off the manifold. Stuart Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.