rarbowman Posted March 5, 2007 Report Share Posted March 5, 2007 Please can you tell me how many O rings should be fitted to each of the above, as my adaptors seem to have cutouts for 2 each, yet Moss sell than as 1 per adaptor. Thanks Robert Quote Link to post Share on other sites
Jersey Royal Posted March 5, 2007 Report Share Posted March 5, 2007 (edited) Please can you tell me how many O rings should be fitted to each of the above, as my adaptors seem to have cutouts for 2 each, yet Moss sell than as 1 per adaptor.Thanks Robert Robert, One per nylon adaptor. Should check they are viton seals, as they resist heat and chemicals and will last longer. Dont know if Moss sell those but got mine from RTR And if the injector rattles you will need to change inner o ring. Have a search there is loads of interesting stuff on this subject Regards Guy Bet you like these too. Edited March 5, 2007 by Jersey Royal Quote Link to post Share on other sites
rarbowman Posted March 5, 2007 Author Report Share Posted March 5, 2007 Robert, One per nylon adaptor. Should check they are viton seals, as they resist heat and chemicals and will last longer. Dont know if Moss sell those but got mine from RTR And if the injector rattles you will need to change inner o ring. Have a search there is loads of interesting stuff on this subject Regards Guy Bet you like these too. Many thanks Guy. I have now seen the light and I am converting to a single 1.25 inch SU, 2 cup holders a fury dice and velour seats. Rgds Rob Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.