matty o Posted January 19, 2007 Report Share Posted January 19, 2007 I had a problem with over fuelling I traced the fault after some time to the over fuel leaver, the lever was returning but not the cam it acting on Unfortunately in freeing it I moved the datum rod I have put it back to where I think it was but I not sure if it right I have done a surch on the form and the figure of 1.44mm between the roller cam and the shuttle is this correct, as it’s less than I have at the moment? Quote Link to post Share on other sites
Andy Moltu Posted January 19, 2007 Report Share Posted January 19, 2007 It does depend on the state of tune of the car - ball park figures from memory are about 60 thou" for standard car & 63 thou" for fast road - 3/4 race setup. I think your figure of 1.44mm fits with the standard setting. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.