sfjsalter Posted May 8 Report Share Posted May 8 Hello TR250. I have no power to the fuel gauge and temperature sensor. Just tested the lights and the brake lights are not working. (not sure if related to a recent loss of brake pressure - I can hear a vacuum noise) Fuses are fine. Indicators / reverse lights are fine. Any quick obvious thoughts before I spend time looking for the circuit fault? Thanks Steve Quote Link to post Share on other sites
RobH Posted May 8 Report Share Posted May 8 (edited) It depends on where the failed circuits pick up power Steve. It should be from the fuseholder according to the circuit diagram but if there is power there, someone may have swapped them to the B terminal on the instrument voltage stabiliser. It sounds as though there is no power to that point. Edited May 8 by RobH Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.