cp7535he Posted May 4 Report Share Posted May 4 Any one sucessfully removed a rotor from the Lucas Mk 2 Metering Unit body ? If so how and what did you use to do it ? thanks robin Quote Link to post Share on other sites
JohnC Posted May 6 Report Share Posted May 6 After removing all the barrel seals, I pushed with my hands against a hard surface. The O rings may have hardened which would make it harder. But there's no magic/hidden key you risk breaking. Do you have the Lucas manual? If not, it's essential. Cheers, JC Quote Link to post Share on other sites
cp7535he Posted May 6 Author Report Share Posted May 6 thanks JC Kinda wonder on how to keep the rotor from moving as you undo the rotor retaining plate lucas diag no 58 & fixing screws no 59 and the other side rotor thrust plate no 51 and its fixing screws no 50 also the control top/shuttle/fixed stop ~ drops out ? Did you source that sleeve o ring replacement from the Uk? cheers robin Quote Link to post Share on other sites
Neil Ferguson Posted May 7 Report Share Posted May 7 Why are you doing this? Quote Link to post Share on other sites
JohnC Posted May 8 Report Share Posted May 8 On 5/7/2024 at 2:31 AM, cp7535he said: Did you source that sleeve o ring replacement from the Uk? No, from a source here in Oz. But I don’t know where he got them from. Quote Link to post Share on other sites
cp7535he Posted May 9 Author Report Share Posted May 9 (edited) hi neil well the no 6 rotar hole does not line up with the timing marks on the distrib side of the Mu as it should and I kinda like to have as few variables as possible on timing, mu is in excellant condition otherwise. wanna give me price to realign ? I can email you seperately as need be .cheers robin Edited May 9 by cp7535he make it clearer Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.