TonyTR2 Posted September 29, 2023 Report Share Posted September 29, 2023 reassembling rear brakes and although the picture attached reflects the same brake plate position that was on the car before I disassembled, I am wondering if it needs to be rotated down once? If kept on this position then the intake cables will go through the check strap. Please advise.Please wait while image is uploading... Quote Link to post Share on other sites
TonyTR2 Posted September 29, 2023 Author Report Share Posted September 29, 2023 Quote Link to post Share on other sites
BlueTR3A-5EKT Posted September 30, 2023 Report Share Posted September 30, 2023 (edited) 12 hours ago, TonyTR2 said: Assembled wrongly Needs to be rotated so the cylinder is in the lower quadrant and the brake lever pointing upwards to align with the cable coming from the compensator Cables do not go through the check strap hoops. see following images. . Note the brake assembly sketch is of the early 9 “ diameter drum brake Edited September 30, 2023 by BlueTR3A-5EKT Quote Link to post Share on other sites
TonyTR2 Posted October 1, 2023 Author Report Share Posted October 1, 2023 Thank you! Corrected and I am very appreciative Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.