Tiger123 Posted August 10, 2023 Report Share Posted August 10, 2023 (edited) So you know when your bad day got worse when you go to make up a spare set of leads and distributor cap and find out the screws missing from the cap to tie the lead in Anyone any idea what size screw is required I do not have any in my boxes ! Edited August 10, 2023 by Tiger123 Quote Link to post Share on other sites
RobH Posted August 10, 2023 Report Share Posted August 10, 2023 (edited) It's is rather a special shape and there don't seem to be any sources for spares. http://www.mgaguru.com/mgtech/faulty/ft045.htm Maybe your best bet is finding an old cap that can be cannibalised. I wonder if the Distributor Doctor can help? Edited August 10, 2023 by RobH Quote Link to post Share on other sites
Tiger123 Posted August 10, 2023 Author Report Share Posted August 10, 2023 Hi Roger Distributor Doctor is only 30 minutes from me in Taunton that's a good shout will take a drive over that way next week Quote Link to post Share on other sites
RobH Posted August 10, 2023 Report Share Posted August 10, 2023 (edited) Just for info the thread is 4BA and the screw dimensions are : If you know someone with a lathe it would be easy to make them from a standard 4BA steel screw. Edited August 10, 2023 by RobH Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.