Napoleon Posted February 25, 2023 Report Share Posted February 25, 2023 Please could someone advise me re the wiring to a new electronic distributor on my TR3A? The car is negative earth. I have misplaced the leaflet that came with it. There are two wires coming out of it, one red, one black. Should the red wire go to positive on the coil and black to negative on the coil? There is already a white wire going from the loom to negative on the coil. Many Thanks, Rod Quote Link to post Share on other sites
RobH Posted February 25, 2023 Report Share Posted February 25, 2023 If it is a Accuspark the instructions are here: http://accuspark.co.uk/InstructionsPDF/AccuSpark Instructions v5.pdf Quote Link to post Share on other sites
Lebro Posted February 25, 2023 Report Share Posted February 25, 2023 The white wire should go to +ve on the coil if the car is -ve earth. Red wire from distributor to also go to +ve oncoil, & black wire to -ve on coil Bob Quote Link to post Share on other sites
Napoleon Posted February 25, 2023 Author Report Share Posted February 25, 2023 Thank you very much Rob and Bob, all done. Rod Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.