Stephen H Posted September 14, 2022 Report Share Posted September 14, 2022 Hi. I've an oil cooler that was fitted to my car when I bought it which doesn't have a thermostat. Ultimately I will add a thermostat but for now I'd like to remove the oil lines and cooler and plug the fittings in the spin-on filter housing. Does anyone know what thread size the fitting might be please? Many thanks Stephen Please wait while image is uploading... Quote Link to post Share on other sites
BlueTR3A-5EKT Posted September 14, 2022 Report Share Posted September 14, 2022 (edited) Join the two outlets with one of your existing oil cooler hoses or you will probably not have oil flow through from the pump to the oil gallery. It is a full flow take off not a bypass type. Edited September 14, 2022 by BlueTR3A-5EKT Quote Link to post Share on other sites
Stephen H Posted September 14, 2022 Author Report Share Posted September 14, 2022 34 minutes ago, BlueTR3A-5EKT said: Join the two outlets with one of your existing oil cooler hoses or you will probably not have oil flow through from the pump to the oil gallery. It is a full flow take off not a bypass type. Thanks that is good to know I'll try that. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.