trchris Posted March 9, 2022 Report Share Posted March 9, 2022 Hi Can anyone let me know is the front edge of the surrey top roof slightly dished inwards where it mounts to the screen frame? or should it be almost flat? Im just about to repair and repaint one and have signs of both one end almost flat the other dished slightly (if that makes sense) Chris Quote Link to post Share on other sites
stuart Posted March 9, 2022 Report Share Posted March 9, 2022 (edited) Dont have one here at the moment though I will in a few days (Mines firmly bolted down) but look at this picture it might help. Stuart. Edited March 9, 2022 by stuart Quote Link to post Share on other sites
trchris Posted March 9, 2022 Author Report Share Posted March 9, 2022 Thanks as always Stuart that gives me a shape to go on judging by that mine needs work levelling one side only to match the almost flat side Chris Quote Link to post Share on other sites
stuart Posted March 9, 2022 Report Share Posted March 9, 2022 22 minutes ago, trchris said: Thanks as always Stuart that gives me a shape to go on judging by that mine needs work levelling one side only to match the almost flat side Chris If your not in too much of a hurry I will be able to get some better pictures of one in a day or two. Stuart. Quote Link to post Share on other sites
trchris Posted March 9, 2022 Author Report Share Posted March 9, 2022 That would be very helpful thanks Stuart I am not in too much of a rush Chris Quote Link to post Share on other sites
.thumb.jpg.baf4a57200626b2e494fb5a05f78a82f.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.