Jim F Posted July 25, 2021 Report Share Posted July 25, 2021 Hello all. Is it possible to remove the roller bearing cone, cage and rollers from the diff head once the drive flange is removed? I suspect not but I thought I'd ask. Thx. Quote Link to post Share on other sites
Jim F Posted July 26, 2021 Author Report Share Posted July 26, 2021 something of an interference fit but I managed to prise it out. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted July 26, 2021 Report Share Posted July 26, 2021 Yes, why are you doing it? Once that one bearing assembly is removed how do you propose to re fit and set the pinion bearing preload, without removing the crown wheel carrier from the rear of the diff? If that front bearing is damaged there is a good chance the second bearing will also be damaged by debris from the front bearing. To change that bearing you will need to remove the pinion assembly. Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.