AarhusTr6 Posted April 5, 2021 Report Share Posted April 5, 2021 hi I have my tunnel off presently. When re-fitting, despite reading several forums I cant figure how it fixed to the bulkhead or firewall. PO only fitted it or bolted it to the floor. It is plastic has no pre-drilling at front and no rubber at front either. Appreciate advice Richard Quote Link to post Share on other sites
stuart Posted April 5, 2021 Report Share Posted April 5, 2021 There should be some captive nuts in clips fitted to the holes in the firewall lip and then it is bolted through the cover with 1/4"UNF bolts. Fitting kit Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.