PodOne Posted May 28, 2020 Report Share Posted May 28, 2020 I'd prefer not to have to do this so I thought I'd ask before I start cutting into the mounting brackets. The captive nuts and cages are both missing can the bumpers be fitted without or will I have to cut the brackets and make some new cages. Or is there another option? Thanks Andy Quote Link to post Share on other sites
ed_h Posted May 28, 2020 Report Share Posted May 28, 2020 Andy-- Making new cages is not too bad a project. You could weld them on, but I had holes there, so riveted them on. http://bullfire.net/TR6/TR6-79/TR6-79.html Ed Quote Link to post Share on other sites
PodOne Posted May 29, 2020 Author Report Share Posted May 29, 2020 Thanks Ed Seems a better solution than cutting and welding. I'll source some square nuts. Cheers Andy Quote Link to post Share on other sites
ed_h Posted May 29, 2020 Report Share Posted May 29, 2020 Sorry, I pasted the wrong link. Here's the right one: http://bullfire.net/TR6/TR6-111/TR6-111.html ed Quote Link to post Share on other sites
PodOne Posted May 30, 2020 Author Report Share Posted May 30, 2020 11 hours ago, ed_h said: Sorry, I pasted the wrong link. Here's the right one: http://bullfire.net/TR6/TR6-111/TR6-111.html ed Hi Ed thought they looked a bit soft for bumpers. Just for a metric man what size nuts did you use? Andy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.