Casar66 Posted May 4, 2020 Report Share Posted May 4, 2020 Does anybody know how the venting of the tank works? I ´ve always thought that's within the cap. But today I have changed the rubber seal and looked more deeply into it and found no venting. Quote Link to post Share on other sites
HSM Posted May 4, 2020 Report Share Posted May 4, 2020 Replacement cap seals are not produced with the vent hole in the centre, you have to punch your own. Harvey S. Maitland Quote Link to post Share on other sites
Casar66 Posted May 4, 2020 Author Report Share Posted May 4, 2020 So I did. But if you blow in that, no air went through it, ok, a minimum if you blow with real pressure. But that could not be enough. Quote Link to post Share on other sites
HSM Posted May 4, 2020 Report Share Posted May 4, 2020 To open the vent you need to press the centre of the cap against the spring pressure. Harvey S. Maitland Quote Link to post Share on other sites
Casar66 Posted May 4, 2020 Author Report Share Posted May 4, 2020 Ah, now I got it. Many thanks! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.