heckler Posted September 9, 2017 Report Share Posted September 9, 2017 Could anyone with a TR6 hardtop please post or mail me a picture of the correct location of the underneath side seals please (part 26 in Moss picture). Thanks Chris Quote Link to post Share on other sites
iani Posted January 21, 2019 Report Share Posted January 21, 2019 I realise that this is an old post, however I have a related question. The part Heckler refers to is 626155, there are two of these and they fit in channels underneath the hardtop, one shown in image below. My ask is about 626156, "Seal, Rubber, roof to rear deck" this is the same type of seal, designed to fit in a channel, however, my car doesn't have a channel across the centre section, nor is there any evidence of their having been one, or even of a seal having been stuck straight to the metal. Is my roof missing a channel? does 626156 sit in the side channels that my 626155's are in? A photo please if you have a roof with both seal types fitted. Ian Quote Link to post Share on other sites
heckler Posted January 22, 2019 Author Report Share Posted January 22, 2019 Hi Ian. PM sent Quote Link to post Share on other sites
iani Posted January 24, 2019 Report Share Posted January 24, 2019 Having received a number of very helpful pics from Chris (Heckler), it appears that a section of steel plate carrying the rubber seal channel is missing from my hardtop. The interesting thing is that there is no evidence of anything having been cut away, there is a tell tale mark of a seal having been glued immediately behind the lip below the rear window. I now have a hardtop seal channel from an MGB, it isn't the right profile but it is quite malleable, I think I need to have a new rectangular section let in and then attach the channel, all should then be as per every other hardtop pic I've seen. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.