MJK Posted June 29, 2016 Report Share Posted June 29, 2016 I want to fit new 2500 badges above the quarter light on the rear wings of my TR5. It's a bit of detail that wasn't done during my rebuild about 20 years ago and I've just treated myself to some badges. So, is there a template that describes it's exact positioning relative to the quarter light? Like so many things, this may have been covered before but I can't find anything on the forum. Many thanks, Malcolm Quote Link to post Share on other sites
harrytr5 Posted June 30, 2016 Report Share Posted June 30, 2016 You are quite welcome to measure mine Malcolm if you are going to IWE which is less then three weeks away. I will be in the master class (Signal Red) Regards Harry Quote Link to post Share on other sites
MJK Posted July 1, 2016 Author Report Share Posted July 1, 2016 Thanks Harry. I'm still working on getting to the IWE this year and will take you up on the kind offer if I manage it. I'll be the one carrying a tape measure!!! Regards, Malcolm Quote Link to post Share on other sites
Robert Longstaff Posted July 5, 2016 Report Share Posted July 5, 2016 could do with replacing mine, where did you get yours from? robert Quote Link to post Share on other sites
harrytr5 Posted July 5, 2016 Report Share Posted July 5, 2016 Best ones I have seen and bought were from the Roadster Factory in the USA. Charles Runyon had them made and they are high quality. Regards Harry. Quote Link to post Share on other sites
Robert Longstaff Posted July 5, 2016 Report Share Posted July 5, 2016 thanks, R Quote Link to post Share on other sites
TR5tar Posted July 6, 2016 Report Share Posted July 6, 2016 Hi Robert,I find the Roadster Factory's website a bit difficult to navigate sometimes, so to help speed things along for you . . .http://trf.zeni.net/wc/specials6.17/7.phpDarren Quote Link to post Share on other sites
Robert Longstaff Posted July 10, 2016 Report Share Posted July 10, 2016 thanks darren Quote Link to post Share on other sites
MJK Posted July 12, 2016 Author Report Share Posted July 12, 2016 Robert/Darren, I got a bit ahead of myself with my opening post and had only ordered badges from TRGB at that stage. They advised me a day later that there were none in stock and they were unable to source them in the short term. I then tried the Roadster Factory and spoke with them in the US but they had none in stock and were unable to tell me when they might be making a new batch. So, I am also still looking for badges and would welcome any suggestions as where to source them. Regards, Malcolm Quote Link to post Share on other sites
harrytr5 Posted July 13, 2016 Report Share Posted July 13, 2016 Try John Sykes (TR Bitz) Regards Harry Quote Link to post Share on other sites
MJK Posted July 14, 2016 Author Report Share Posted July 14, 2016 Thanks Harry, I'll give them a call. Also, I'm still working on IWE but looking unlikely at the moment. Regards, Malcolm Quote Link to post Share on other sites
openroad Posted August 5, 2016 Report Share Posted August 5, 2016 Are you lads still looking for 2500 rear wing badges ? Just might have a couple of spare , Cheers, Conrad. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.