Keith Warren Posted July 30, 2015 Report Share Posted July 30, 2015 Hi I have been thinking about fitting a switch on the CP TR6 so I can activate the wipers once I have already converted the overdrive switch with a logic controller so was thinking about fitting another switch opposite using another 2 hole shroud, has anyone wired this in before? Cheers Keith Quote Link to post Share on other sites
Steves_TR6 Posted July 30, 2015 Report Share Posted July 30, 2015 That's an interesting thought and one I've had a few times but not acted upon! I did buy, build and fit the maplin three speed intermittent wipe kit, which is excellent. Steve Quote Link to post Share on other sites
Keith Warren Posted July 31, 2015 Author Report Share Posted July 31, 2015 Steve Thanks for that I did look at it in the TSSC mag someone fitted it but it looks like a lot of bulky wires did you find that also MG club do one for MGB's but it is the same wiper motor so should fit, all I wanted was a simple one wipe operation with three wires going to the switch I thought a jump between wires may be possible. Keith Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.