grumpy2 Posted December 21, 2014 Report Share Posted December 21, 2014 Started the holiday spannering today with very mixed results decided to fit exhaust system, twin pipe wheelbarrow type what are these parts for? any one have a set of instructions or at least a decent diagram photo? thanks Gary ps sorry for all the questions but this is my first TR Quote Link to post Share on other sites
grumpy2 Posted December 21, 2014 Author Report Share Posted December 21, 2014 heres my guess the rectangular black rubber connects to the rear silences bracket. the right angle goes through the boot floor and the rubber hanger. The other 4 parts help to trap the rubber hanger. The round rubbers make a grommet in the boot floor. If I'm right it all seems a bit Heath Robinson Quote Link to post Share on other sites
peejay4A Posted December 21, 2014 Report Share Posted December 21, 2014 Mine was mounted in that way but the boot floor holes were not grommeted. Ideally you want some metal sleeves in the holes in the hangers or they will squish and look a bit naff. The bolts look a bit on the long side. Quote Link to post Share on other sites
Mark69 Posted December 21, 2014 Report Share Posted December 21, 2014 I've got the same kit that came with my twin pipe system, thinking of welding brackets to boot floor before paint goes on, might strengthen floor while I'm at it. Mark Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.