richard26 Posted October 24, 2013 Report Share Posted October 24, 2013 For some reason the passengers side window rear roller came out of the lifting mechanism, I have refitted it (without too much swearing). I could do with about another 5 to 10 mm raising of the glass to get a better seal to the soft top. How do I go about this? Thanks in anticipation . Quote Link to post Share on other sites
stuart Posted October 24, 2013 Report Share Posted October 24, 2013 On the door frame just back from where the handle to open/lock is there are two small bolts, behind is a bracket with a bend on it that limits the upward movement, the holes are slotted to allow more or less wind up of the window. Sometimes you do need to elongate the holes a little to get the amount of movement you require.Check that the glass doesnt foul anything before slamming the door. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.