RogerH Posted October 14, 2013 Report Share Posted October 14, 2013 Hi Folks, I found the filter magnet in the Overdrive in four pieces the other day. So today I bought a new magnet(s) only to find it is slightly different. The new magnet is made up of three fairly thin rings. The original was one thickish ring. All three rings togther are slightly thicker than the original; However using just two rings it is slightly thinner than original. What have people used as the norm? - three rings or two rings. Roger Quote Link to post Share on other sites
John Morrison Posted October 14, 2013 Report Share Posted October 14, 2013 Roger, are you sure your original wasn't three very stuck together rings, mine were just like that? John. Quote Link to post Share on other sites
RogerH Posted October 14, 2013 Author Report Share Posted October 14, 2013 Hi John, no, it was definately a one piece item (when made) - apprx 3mm square section - and in 4 pieces. The new magnets are more than 1mm thick for each one (3 stacked together) . Same outside diameter as the old one but a much smaller I/D. Roger Quote Link to post Share on other sites
RogerH Posted October 15, 2013 Author Report Share Posted October 15, 2013 Sorted - see my rebuild thread in the 4/4A forum Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.