Graze Posted October 11, 2013 Report Share Posted October 11, 2013 Does anyone have a copy of the manual describing the process to remove the windscreen frame & windscreen Getting it replaced next week and dont want any damage done so would like to give them the instructions or a link to a video thanks in advance Graze Quote Link to post Share on other sites
Tim D. Posted October 11, 2013 Report Share Posted October 11, 2013 don't have it to hand, but did it last year.. 1) undo bolts at base of windscreen 2) under the dash on each side by the A posts undo two nuts that secure the rods that extend out of the bottom of the screen. 3) undo the clamp bolts at the top of the A-post (can be seen between the door and the front wing 4) lift up the windscreen Or in my case 4) realise the that the screen has not been off since the car was assembled and is rusted in place 5) pull hard on the screen after soaking the appropriate parts in oil 6) snap the rods that slot into the A-posts 7) Discard windscreen surround and fit a rust free US replacement Tim Quote Link to post Share on other sites
Graze Posted October 11, 2013 Author Report Share Posted October 11, 2013 Thanks Tim Hopefully mine will come off ok Graze Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.