peejay4A Posted September 15, 2012 Report Share Posted September 15, 2012 Should the tags be bent down or up to support the loom under the dash? The loom is heavy and keeps falling down with the tags downwards so it's tempting to switch it around but it looks as though that might cause the loom to foul the air vents. Quote Link to post Share on other sites
Steve Brabazon Posted September 15, 2012 Report Share Posted September 15, 2012 Have mine bent down. Steve Click on thumbnail Quote Link to post Share on other sites
AlanT Posted September 15, 2012 Report Share Posted September 15, 2012 I did mine more or less like the photo above. But I used a bit of wood about 1in square and a foot long to tap the end so that it made a semicircle. The loom does not fall out. Al. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.