silverfox4 Posted November 2, 2012 Report Share Posted November 2, 2012 Here are the before and after images between the starting pointing of 222 mm main link and 78 mm vertical link and the re-fetteled geometry of 225 mm / 80 mm. There is quite a noticeable difference in the motion of the linkage now and is a lot smoother. The question about the WOT position raised by Pete seems OK when operated by hand, but I need another pair of eyes to help confirm that it is OK when using the pedal. Many thanks for the valued in-put Quote Link to post Share on other sites
peejay4A Posted November 2, 2012 Report Share Posted November 2, 2012 That's very similar to how mine looks Alf. Quote Link to post Share on other sites
silverfox4 Posted November 2, 2012 Report Share Posted November 2, 2012 Thanks Pete, guess I should be OK then - much appreciated. We also machined out the throat of the front carb and fitted a new choke section to overcome bush and butterfly clearance issues. Now we find out if the effort was worth it. Cheers for that. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.