TR24178 Posted January 15, 2012 Report Share Posted January 15, 2012 Am I right in assuming the welded on T-shaped wiring clips/tags on the body are covered with black heat shrink tubing? Quote Link to post Share on other sites
Andrew Smith Posted January 15, 2012 Report Share Posted January 15, 2012 When I rewired TuRK (58 3A) in 2010 I did this, and it is quite effective - the other way is to use strips of plastic/pvc sleeving which I believe the factory used. Cheers Andrew Quote Link to post Share on other sites
Mike Graham Posted January 15, 2012 Report Share Posted January 15, 2012 I used shrink wrap as well. Although not original, it works well and won't fall off like the rubber tube originally used. I'm going to switch the TR6 to shrink wrap as well as some point. Cheers, Mike Quote Link to post Share on other sites
Menno van Rij Posted January 15, 2012 Report Share Posted January 15, 2012 Yes, shrink wrap here too! Menno Not quite 'in focus' on this pic (the tap was the focal point), but you'll get the point. Quote Link to post Share on other sites
TR24178 Posted January 16, 2012 Author Report Share Posted January 16, 2012 Thanks for your help, just thinking ahead, at the moment I am at the covered in fine white dust stage!! Thats spare time since Christmas and all I've got to show is the 4 wings nearly ready for primer! The Boss says leave them bloody dusty overalls in the workshop!! I'll get my own back in the spring when she brings half the garden in the house on her muddy wellies!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.