DJF Posted November 13, 2011 Report Share Posted November 13, 2011 Need some help please I've refurbed the front suspension and now attempting to put it all back together! I'm having probs with the top ball joint/vertical link. I've compressed the spring got the tapered pin in the top of the vertical link and checked for free rotation of the link. Problem is, when I release the compression on the spring the link won't rotate;I've also noticed that the steering 'stop' is tight up against the spring plate.....not sure whether this is a problem. Might be something basic that I can't grasp so any suggestions would be welcome. 0 Back to top Quote MultiQuote Edit Report Quote Link to post Share on other sites
AlfredHitchcock Posted November 13, 2011 Report Share Posted November 13, 2011 (edited) Are you sure youve got the top wishbones fitted correctly i.e bigger swept one to the front. There is an adjustable stop on the back of the vertical link that stops it hitting the spring plate. Apologies if youve already done this. Edited November 13, 2011 by AlfredHitchcock Quote Link to post Share on other sites
DJF Posted November 13, 2011 Author Report Share Posted November 13, 2011 Hi Alfred Thanks for the reply...........yes checked the wishbones they're fitted correctly. I'll check the stop though...... overlooked the 'adjustable' bit! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.