angelfj Posted August 21, 2011 Report Share Posted August 21, 2011 Trying to wrap up some final details on the "Grey Lady" and need some advice. We could not find details in the spare parts catalog or any other "official" document. The photo below shows the windscreen motor of Don Elliott's original early 3A. However, we can not be sure due to the limited resolution. Can someone confirm the correct attachment details for the windscreen motor bracket. We are assuming that the two bolts each have a flat and lock washer, but would appreciate someone confirming that this is correct. Many thanks Quote Link to post Share on other sites
BlueTR3A-5EKT Posted August 22, 2011 Report Share Posted August 22, 2011 Trying to wrap up some final details on the "Grey Lady" and need some advice. We could not find details in the spare parts catalog or any other "official" document. The photo below shows the windscreen motor of Don Elliott's original early 3A. However, we can not be sure due to the limited resolution. Can someone confirm the correct attachment details for the windscreen motor bracket. We are assuming that the two bolts each have a flat and lock washer, but would appreciate someone confirming that this is correct. Many thanks Hi There The part nos for the Bracket, wiper motor are in the parts book Plate AG11 onwards Use HU704/P & WQ0307 qty 3 each WQ series are square section split washers. I did what you suggest, HU706P + GHF331 + WM57 qty 3 each (Wing attachment screws) Cheers Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.