Jump to content

Recommended Posts

Hi. My speedo is sticking, seems OK when accelerating but when it goes below 30 its stays at 30 even when stopped. If I tap the glass it drops back into position then is Ok again until I go below 30 when it sticks again.

 

Is this just a minor fault or does it need to be sent off to a specailist?

 

Thanks

Link to post
Share on other sites

Hi. My speedo is sticking, seems OK when accelerating but when it goes below 30 its stays at 30 even when stopped. If I tap the glass it drops back into position then is Ok again until I go below 30 when it sticks again.

 

Is this just a minor fault or does it need to be sent off to a specailist?

 

Thanks

 

 

Could be a broken or fouled return spring. Will most likely not get any better without repair. DIY is possible but quite delicate work. See http://www.miller-garage.com/documents/Speedo_Repair.pdf

Tom

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.