tr6tuga Posted February 23, 2011 Report Share Posted February 23, 2011 Warm weather is about to install, and yes this the south warm, and as I remember when picking up my tr in late august, got warm feet all the way (2000milles) Now after overhaul of gearbox and clutch is time to isolate. Can any one give the links to this comun issue how to isolate tunnel cover ? Quote Link to post Share on other sites
RogerH Posted February 23, 2011 Report Share Posted February 23, 2011 ..if you go back to JULY 2006 in the TR6 section there are a number of posts on this subject of insulating the tunnel/Exhaust pipe etc. If you do a search in the front page of the forum and type in 'thermal insulation' you will get a number of hits. Roger Quote Link to post Share on other sites
tr6tuga Posted February 27, 2011 Author Report Share Posted February 27, 2011 ..if you go back to JULY 2006 in the TR6 section there are a number of posts on this subject of insulating the tunnel/Exhaust pipe etc. If you do a search in the front page of the forum and type in 'thermal insulation' you will get a number of hits. Roger just came from a spin testing gb after long overhaul, replace heating valve and refit tunnel as it was. So far no heating frets, thanks for advice Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.