GoGuy Posted November 5, 2010 Report Share Posted November 5, 2010 Hi all, Having removed my PI system in favour of Webers,can anyone guide me as to where to source a replacement fitting for the distributor? I realise that I could leave the PI pedestal, but would prefer to lower the distributor, if only to improve access to No.4 plug. Can the item I require be found on any non-PI 6 cylinder Triumph unit? Thanks GoGuy Quote Link to post Share on other sites
Nick Jones Posted November 5, 2010 Report Share Posted November 5, 2010 Can the item I require be found on any non-PI 6 cylinder Triumph unit? Thanks GoGuy Basically yes. Just watch out for the GT6 ones as they had Delco distributors. I'm not sure the pedestal is different but the clamp certainly is. Any of the saloon ones should be fine. Nick Quote Link to post Share on other sites
Willie Felger Posted November 6, 2010 Report Share Posted November 6, 2010 Hello GoGuy, I used my own dizzy, but the very short pedestal and the drive gear from a US spec TR6. You'll need both bits. Good luck, Willie Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.