trden1966 Posted July 13, 2010 Report Share Posted July 13, 2010 New member and my first post. Need to replace the door channels on my 4A o/s door. I have a pair of new TR5 door channels (Moss parts 812437/850431) The question is : will they fit OK?. Any advice would be appreciated. Thanks Dennis Quote Link to post Share on other sites
stuart Posted July 13, 2010 Report Share Posted July 13, 2010 New member and my first post. Need to replace the door channels on my 4A o/s door. I have a pair of new TR5 door channels (Moss parts 812437/850431) The question is : will they fit OK?. Any advice would be appreciated. Thanks Dennis Yes they are the same. Stuart. Quote Link to post Share on other sites
trden1966 Posted July 13, 2010 Author Report Share Posted July 13, 2010 Thanks For the info. The reason I ask is that when I fitted them, I had 1/2" of front to rear movment on the door glass. (The original TR4A channels had no movement in the glass) Can they be shimmed to take up this movement?. Thanks. Dennis Quote Link to post Share on other sites
stuart Posted July 13, 2010 Report Share Posted July 13, 2010 Thanks For the info. The reason I ask is that when I fitted them, I had 1/2" of front to rear movment on the door glass. (The original TR4A channels had no movement in the glass) Can they be shimmed to take up this movement?. Thanks. Dennis They were very often shimmed originally. Stuart Quote Link to post Share on other sites
trden1966 Posted July 13, 2010 Author Report Share Posted July 13, 2010 Thanks. Will give it a go. Dennis Quote Link to post Share on other sites
trden1966 Posted July 20, 2010 Author Report Share Posted July 20, 2010 Stuart, Have put in shims, door glass is now a good fit with no lateral movement. Thanks. Dennis Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.