boggie Posted July 1, 2009 Report Share Posted July 1, 2009 Hi All, Our car has had a P&P conversion which included a generic signal/horn stalk. I have just replaced the whole loom so need to know how to connect the stalk in place of the original control head connections. Ideally I need the wiring colour code showing what wire is connected to which control head connection and what the internal connections of the control head are. Many thanks, Ian Quote Link to post Share on other sites
Don Elliott Posted July 1, 2009 Report Share Posted July 1, 2009 The excellent description of the TR3 control head by Clive Elsdon from the TR Glavon Group may show the colours. Here's the link :- http://www.britishcarlinks.com/technical_articles_page.htm Scroll down about 7 sections and you will find it on the Australian TR site. Quote Link to post Share on other sites
boggie Posted July 2, 2009 Author Report Share Posted July 2, 2009 The excellent description of the TR3 control head by Clive Elsdon from the TR Glavon Group may show the colours. Here's the link :- http://www.britishcarlinks.com/technical_articles_page.htm Scroll down about 7 sections and you will find it on the Australian TR site. Thanks Dan, I will have a look. All the best, Ian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.