openroad
-
Content Count
2,877 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by openroad
-
-
Hi,i am just about to put new seals and bearing in my drive shafts,got the kits from rimmers....but i do have spare support brackets if you need them.
Cheers,
Conrad.
-
Hi stuart,i went to raven smith...his name is neil ferguson.07977-001571,seems good and reasonable....you can check him out on ebay...
Cheers,
Conrad.
-
Nicely put alec......in reply to your post dave,i have emailed with the esteemed roger recently and all quite successful,but he did mention that he is not always there.at the end of his email.
I hope all goes well.
All the best,
Conrad.
-
Morning neil, thats your neck of the woods isnt it,maybe you will hear through the grapevine,hopefully the car is still on the road.
I met a chap last week that has just sold his tr5 to a lincolnshire farmer for £45,000.....its true what they say then "you never meet a poor farmer " !
Cheers,
Conrad.
-
Thanks suzanne,sounds fine to me,so no real need for the poster to remove it..
Cheers,
Conrad.
-
I have noted several removed posts Recently...whats it all about ?
The title was quite intriguing..
Conrad.
-
Hi alex ,you could try neil ferguison at raven smith...he also refurbs metering units,injectors etc....tel.07977-001571
Good luck,
Conrad.
-
Thanks stuart.....have bought some....
-
Thanks stuart.,excuse the ingnorance but what is VHT Please ?
Conrad.
-
So if they need to be silver,is there a good heat resistant paint on the market to make a steel exhaust look good again.
Thanks,
Conrad.
-
Morning which part are you looking for please.i might be able to help you.
Cheers,
Conrad.
-
Hi colin,sounds like you have solved the problem,hope so anyway....i saw your post re the national trust,and will be using that thanks.......off out today myself,just put new discs and calipers on,so bedding them in,any excuse this weather !!
All the best,
Conrad.
-
Well done peter,i will obviously struggle to keep up with you now !
As neil says,enjoy it now after all that hard work....
Cheers,
Conrad,
-
Thanks for the information.....just wanted to know,...i am fixed up thanks...i now have a nice one for my car,c/o this forum.
Cheers,
Conrad.
-
Hi david,....so is the gt 6 steering wheel the same as a tr5 wheel ?
Cheers,
Conrad.
-
Hi mike, why dont you contact the chromers and see if they are ok with the bulb holders in,i have seen it done both ways.
I reckon they are a bugger to remove,and dont know where to get replacements either.
I see you are in s.yorks,who are you using.if you dont mind me asking.
Cheers,
Conrad.
-
Hi bob,check out rimmers website,its easier to see....i reckon the tie rod is for non steering lock and the anti torque strap for vehicles with steering lock.so the same thing but different !...i presume yours hasnt got a steering lock !
Check out rimmers see what you think.
Cheers,
Conrad.
-
Hi bob,two of the part no`s that you have listed are the same....I might be able to help,
Cheers,
Conrad.
-
Hi pete,
Sent you a pm re-parts Book.
Conrad.
-
Hello peter,i have just looked at some of the film,crikey there is loads to see....he ums and ahhs a bit,but i am sure there will be plenty of interesting stuff as i find the time to watch more....
Thanks for that,
Conrad.
-
Hi jim,have sent you a pm....i have a good spare one...
Cheers,
Conrad.
-
Hey tom,good to hear from you,i didnt realise the situation ,so good to hear you have the tr250 back,is it a goer or for resto....You are welcome to come over ,but depends if pete moffat has been,as to whether there are any biscuits left !!!
Cheers,
Conrad.
-
I am pleased that you said that stuart,because that is what i am doing.....And yes nick the underside is body colour,signal red...i have done 3/4 of it when it was on one side,i have now flipped it over onto the otherside...,layed carefully on comfy settee cushions.
Good luck with the gaps etc.
Conrad.
-
Hi rob,so it looks like you will be on the road in your beloved TR5 this spring.....you will just love it !
I got up early this morning,brushed snow and ice off the car and went to my lock up........kick started the gas heater blower,so i could continue stonechipping and re-spraying the underside of mine.
Local kids and dads were already building a massive sowman,we must all be mad !!
All the best.
Conrad.
shame on rimmers
in TR6 Forum
Posted
Similar story,...i bought a boot seal from them the other day,i asked if it would actually fit,they checked and had no returns,so presumeably it would fit.......Yes it fitted round the boot beautifully,but not a cats in hell chance of closing the boot fully....so i started pairing it with a stanley knife,it is now down to nothing and raggedy as hell,and the boot will still not shut and therefore lock.....
I am looking forward to their faces as i hand it back to them !
Cheers,
Conrad.