-
Content Count
811 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Malbaby
-
-
-
Thanks Stuart....If I use the original TR4 accelerator rod/pedal, I will have to put four right angle bends in the horizontal part of the pedal rod to pass in front of the clutch and brake pedal arms as there does not seem to be enough clearance for the horizontal part of the linkage rod to pass behind the b&c pedal arms.
-
Fitting a TR6 pedal box into my TR4.
Suggestions for throttle pedal fitment please.
Prefer not to run a cable type linkage vertically.
-
Thanks for the offer, unfortunately I am in Australia.
Just the distance in from the engine side of the firewall for the engine side two mount holes would probably be all that I would need to start the mounting.
-
Thanks for the pic.
Looks like the 2 top mount bolt holes that are closest to the engine are about 1" in from the edge which places the box against the engine side of the firewall.......would that be correct?
-
Can someone assist with measurements for bolt holes or other reference please.
-
Require some mearsurements so that I can fit the TR6 Pedal box that I have into my TR4A.
Can someone assist with bolt hole distance or other reference please.
Lower front control arm inner bush fitment...help pls.
in TR4/4A Forum
Posted
The bushes that I have are as seen in the Moss catalogue for TR4A, although they were not purchased from Moss.
As you can see from my pics they fit the lower fulcrum mount plate correctly.
I can only assume that all my parts are original factory fitment.