Guest tonpartain Posted November 24, 2006 Report Share Posted November 24, 2006 I'm changing my brake calipers on a '70 TR6. The calipers that are coming off the car are Type 16 PB, with metric bolts. The replacement calipers that I have are Type 16 P and the bolts don't fit because the "shoulder" won't fit through the holes. Are all Type 16 P calipers standard thread? Also, I'm assuming that the holes for the input pipe in the 16 P calipers are standard thread and not metric. Is that correct? Thanks Chris Quote Link to post Share on other sites
paul gardner Posted November 24, 2006 Report Share Posted November 24, 2006 Tonpartain, Suggest you consult the Moss -Europe on line parts catalogue. It lists all the various parts for each of the 3 caliper variants used on the 6. yours Paul Quote Link to post Share on other sites
wheeler Posted November 24, 2006 Report Share Posted November 24, 2006 Chris Have a look at this http://web.archive.org/web/20040206045331/...Front/Front.htm lots of info regarding calipers. Hope this helps Regards Bill Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.