phil04 Posted October 17, 2006 Report Share Posted October 17, 2006 Does anybody know the size and type of thread on the water temperature probe/sender located in the thermostat housing ? Thanks Phil Quote Link to post Share on other sites
john.r.davies Posted October 17, 2006 Report Share Posted October 17, 2006 Phil, No, but the sensors are universal on all Triumph six cylinders and readily available from any Triumph supplier. New sensors are variable in their thermal response and not reliable, but here is the proper response of a new one. Does that help, or was your question directed at something else? John Quote Link to post Share on other sites
phil04 Posted October 18, 2006 Author Report Share Posted October 18, 2006 Phil,No, but the sensors are universal on all Triumph six cylinders and readily available from any Triumph supplier. New sensors are variable in their thermal response and not reliable, but here is the proper response of a new one. Does that help, or was your question directed at something else? John Thanks John, I recently bought new gauges and I am now informed by the supplier that I should have also bought the related temp. probe and fuel sender to get the gauges responding correctly. The temp. probe comes with 1/8th NPT so I may need an adapter. I know if I say send me an adapter they will ask what thread I want. Regards Phil Quote Link to post Share on other sites
Guest ron Posted October 18, 2006 Report Share Posted October 18, 2006 Hi Phill It's 5/8" UNF parallel, hope that helps, Ron Quote Link to post Share on other sites
phil04 Posted October 18, 2006 Author Report Share Posted October 18, 2006 Hi PhillIt's 5/8" UNF parallel, hope that helps, Ron Thanks Ron Regards Phil Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.