RogerH Posted May 13, 2022 Report Share Posted May 13, 2022 Hi Folks, this is a simple one but I had to scratch my head before the penny dropped. I needed to remove and fit a new right hand striker plate Plate. The attachment screws are rather short and the attachment plate, inside the 'B' post moves about. TRying to align the parts was testing. Not enough room to see what is going on. My simple fix was to use much longer screws ( 2 - 3" long). With these you now have the room to get a thin screwdriver behind the plate to shift the attachment plate around and get all the screws started. Once started you can now fit the correct screws. Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.