smallmouth Posted May 15, 2020 Report Share Posted May 15, 2020 Triumph tr friends: I,m restoring a brake-master cylinder from a early tr2. I do need some help putting it back together again: I've added 2 pictures with the different parts in the right order.... My question is about the springwasher between the piston and the rubber(before the big spring) does it matter how you fitt it? The over the big rubber are iron rings to keep the rubbers at their place....where can I get them? Any other tips are welkom.. Kind Regards Remo Frederiks TS 1137 LO The Netherlands Quote Link to post Share on other sites
ijonsson Posted May 15, 2020 Report Share Posted May 15, 2020 (edited) From Haynes workshop manual I guess your question actually is if you should turn the convex side of the spring washer towards the coil spring or not. To my knowledge it shouldn't matter. Edited May 15, 2020 by ijonsson Quote Link to post Share on other sites
smallmouth Posted May 16, 2020 Author Report Share Posted May 16, 2020 Inge Thanks for your commend.... I've watched your tr2 restoration on the site...nice job... Regards Remo Frederiks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.