JJC Posted March 9, 2017 Report Share Posted March 9, 2017 Would be grateful for a picture showing exactly where the rubber seal that goes on the side of the hardtop against the rear side deck goes. It doesn't look as though it should be glued over the inside of the trim rivets, more like on the upper edge (or lower if the hardtop is upside down). Also does the lip face inwards? Looks as though it should. A picture from PAC50M would be perfect! JJC Quote Link to post Share on other sites
JJC Posted March 9, 2017 Author Report Share Posted March 9, 2017 Having reread the Triumph instructions the lip should point inwards, which is as guessed. But it's still not clear whether it should be glued to the vertical side of the hard top or to the surface which is horizontal. The back sealing strip is fixed to that surface. JJC Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.