jwykes Posted May 12, 2013 Report Share Posted May 12, 2013 I have now taken the plunge and welded the replacement front valance panel to my TR6. Refitting the front wings shows some panel fettling is required. Does anyone have close up photos of the wing headlamp panel to valance? Want to understand how far out my panels are. thanks James Quote Link to post Share on other sites
darren-cambs Posted May 12, 2013 Report Share Posted May 12, 2013 Hi James Not sure exactly what angle you need the picture from, but try here for starters: http://www.flickr.com/photos/darren-cambs/6204532116/in/set-72157627678038865 Failing that, you should be able to find something in here: http://www.flickr.com/photos/darren-cambs/collections/72157602189715306/ Regards, Darren Quote Link to post Share on other sites
jwykes Posted May 13, 2013 Author Report Share Posted May 13, 2013 Thanks Darren. The car didn't have a front end when I bought it, so it make panel alignment and gaps more of a challenge regards James Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.