ians Posted May 31, 2012 Report Share Posted May 31, 2012 OK so I removed the plugs and rocker cover then removed the small screw in the rear pedestal. Turned the engine over on the starter till I got 50lbs on the oil pressure gauge and just the tiniest trickle of oil emerges from the hole in the pedestal. Is this correct? I would have expected more given the 50lbs down below. Quote Link to post Share on other sites
MikeTR-6 Posted May 31, 2012 Report Share Posted May 31, 2012 The flow of oil to the rocker shaft is limited by the camshaft revolving , Don't expect a full flow of oil up top. Mike Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.